Thursday, October 1, 2009

Department Stores?

Why should hang tags with metal eyelet be used in department stores? Some upscale department stores that carry high-end products such as: ladies designer hand bags, designer jeans and high-end leather products use special hang tags with metal eyelets to help prevent thief. After the special hang tag is attached to the product then a theft prevention cable is strung through each of the metal eyelets on the hang tags that would connect all of the like items together. This would make it difficult for one of the items to be removed from the store without it being paid for. A sales clerk would have to unlock the security cable to remove the item in order for it to be purchased. Many retail stores have found it necessary to adopt several methods to help prevent loss of products by theft. By having a hang tag with an eyelet attached to the tag makes it a little more difficult for the tag to be removed. They also attach these metal sensors in the tag that would allow the metal from the eyelet as well as the sensor to alarm if the item is being removed from the store when it hasn't been paid for.

Hang tags with eyelets are used in a variety of products that you see and perhaps you used these items every day. Here are a few items that you probably have seen eyelets attached to: men's work boots, sports tennis shoes with strings, interim office envelopes, belts, ladies handbag shoulder straps, on craft items and on greeting cards, these are just a few items that you probably have seen metal eyelets on. Eyelet are used on a lot of things they are just one of those small unimportant things that you don't notice very much.

Hang tags with brass eyelets are also used in department stores to increase the sale of particular items. That marketing department for the product will use a high end designed hang tag with a brass eyelet because it can be used to get the attention of the consumer. A hang tag with a brass eyelet will stand out a little more than one without an eyelet. Plus it would cost a little more which would also say to the consumer that this company believes in making high quality items. Studies show that the consumer will purchase a product because of how it is promoted or marketed in the store. If an item has a hang tag attached to it verses a product that does not have a hang tag attached the consumer is likely to go with the one that has the hang tag. This is even more true if that hang tag offers a discount off the purchase of the item.

Hang tags with brass eyelet are found in the appliance section of department stores on the door handles or inside the appliance. These hang tags often provide the consumer with expected performance information of the item. Hang tags with brass eyelets are also found in furniture department stores. They are often used on lamps and other light fixtures because it is difficult to attach a price tag to those items due to their shape. If you should go to any jewelry department store they will have a small price hang tag attached to the item. Most of the time those hang tags do not have the brass eyelet attached to them because they are so small.

Now do you understand some of the benefits of why hang tags with metal eyelet are used in department stores?

Making Sense

Is EMV just another cash grab?

There is a new technology sweeping through the retail payments landscape that promises to revolutionize the way that consumers pay for goods and services. In the United Kingdom, the geographic region that is the furthest into their adoption process, this technology has been described as the biggest change in payments since decimalization, but is EMV, or chip and PIN as it is also known, really the silver bullet that Visa, MasterCard, JCB Co and American Express would have us believe? Retailers aren't convinced it is.

It is hard to blame retailers for their skepticism. In the past 5 years they have been bombarded with changes to their payment card acceptance networks that have come at a significant cost and provided little additional value to retailers. The mention of a term such as PCI, EMV, contactless or interchange rate is enough to send a chill down the spine of small shop owners and CIO's alike. The problem is that retailers view these changes as individual challenges rather than an opportunity to revaluate their approach to retail payments, increase the security of their store systems and boost their bottom line.

Infinite cards - infinite fees.

The interchange rate refers to the percentage amount of each card based transaction that a retailer must pay for the right to accept a specific payment card brand. The interchange rate is tiered, with rates for standard cards ranging from 1.6% to 1.9% of each transaction and rates for premium cards significantly higher at 2.3% to 2.5%. It is the influx of these new premium cards that has increased the average monthly cost of credit card processing by 10% to 20% for many retailers. According to a study by investment firm Morgan Stanley, interchange costs in the United States will reach $32.4 billion by 2010. Merchants around the world have complained of their inability to negotiate these rates and in several geographies including Canada and the United States they have taken their concerns to the government in an appeal for increased regulation of the entire payment card industry.

In response to merchant concerns Visa and MasterCard have pointed to the wide variety of payment options available to consumers and stressed the fact that accepting payment cards is a business decision, not a requirement. Merchants argue that payment cards have become an industry standard to the point where they must accept multiple payment card brands or risk losing business. Merchants that choose to accept payment cards are bound by a card acceptance contract which mandates that any merchant who wishes to accept a specific credit card brand must accept all cards issued by that brand. The card acceptance contract also forbids merchants from setting minimum dollar amounts for payment card transactions or imposing surcharges on certain types of cards. In effect merchants are paying more for card processing, with no added value and there is absolutely nothing they can do about it.

Who does PCI really protect?

A second blow to retailers came in the form of new data security best practices. The Payment Card Industry Data Security Standards or PCI DSS is a set of 12 rules designed to protect card holder data at the point of sale and within a retailer's enterprise systems environment. This standard was created in response to a growing trend in high profile data breaches, such as those with T.J. Maxx and Hannaford Bros. Co., where a combined 50 million account numbers were stolen. According to the Ponemon Institute benchmark study, "2008 Annual Study: Cost of a Data Breach" in the United States the approximate cost per compromised account number to U.S. companies is $231. If you were to apply simple math to this research study, the value of the T.J. Maxx breach is over 10 billion dollars without consideration for fines and lost business.

It is obvious why the payment card industry is motivated to put standards in place to prevent data breaches of this magnitude and at first glance PCI regulations appeared to be a giant step forward in the security and protection of card holder data but as the initial excitement has worn off, the PCI standard has revealed itself for what it really is, a method for card issuers to boost their bottom line while transferring the responsibility and risk of card payments to the merchant.

This point became clear in May 2008 when Heartland Payment Systems, a PCI DSS certified organization, fell victim to a data breach that exposed the details of up to 100 million accounts to cybercriminals. Despite Heartland's certification as PCI DSS compliant and a successfully completed audit by a third party PCI examiner they were condemned by much of the payment card industry. In the wake of the data breach Heartland was immediately removed from the list of certified PCI compliant organizations, forced to recertify and had heavy fines imposed upon them.

This served as a lesson for many merchants who were lead to believe that PCI compliance was the end game rather than part of a much more intensive and far reaching data security program. Merchants were shocked when they discovered that the huge investment many had made in order to achieve PCI compliance did not guarantee their immunity from an attack or a breach. Adrian Phillips, Visa's Deputy Chief Enterprise Risk Officer refused to acknowledge Heartland's PCI compliant status and stated that "[Visa has] never seen anyone who was breached that was PCI compliant. The breaches that we have seen have involved a key area of non-compliance."

Where is the ROI for EMV?

EMV is global standard for credit and debit payment cards based on chip card technology. These chip cards, or smart cards as they are also known, contain an embedded microprocessor and the microprocessor contains all of the information needed to use the card for payment. The chip is protected by various security features and is a more secure alternative to traditional magnetic stripe payment cards.

After enduring rising interchange rates and costly PCI compliance initiatives only to be punished with increased risk and responsibility in regards to card payments many retailers have shown a steadfast resistance to EMV migration. However, this resistance has not prevented more than 100 countries from taking the plunge in an effort to stem credit card fraud. The United Kingdom, which announced their adoption of the standard more than 5 years ago, leads all markets in EMV migration and therefore provides the greatest amount of insight as to how EMV will perform relative to the initial assumptions underlying the transition.

After the U.K. migration deadline of February 14th 2005, the U.K. payments association APACS reported a remarkable reduction in fraud for the year end of December 2005. Fraud due to counterfeiting and lost or stolen cards was reduced by U.S. $110.5 million dollars which was a decline of as much as 31%. This fact alone appears to validate the primary intent of this new technology but as with previous changes in the retail payments environment the benefits of this new standard would be experienced by issuers and associations while a large investment would be required on the part of the merchant. In order to avoid compounding this crisis issuers and acquirers have been careful not to release cost estimates of their own migration efforts and have simultaneously released studies that ignore or largely underestimate the costs for integrated merchants while justifying the migration based solely on the significantly lower migration costs of merchants with stand alone or non-integrated terminals.

Is it all doom and gloom?

While reviewing the vast library of negative press surrounding the payment card industry it is easy for many individuals and organizations alike to acquire a negative, one-sided view of the current retail payments landscape. In fact, the existence of many lobbyist groups is closely tied to their ability to slant various studies and statistics on the topic in this way. It would however be premature to end our analysis here. As with all good arguments, there is an alternative view point that paints a drastically different picture, one of a highly successful payments medium that supports the global economy and steadfastly focuses on security of its billions of subscribers.

Supporters of regulatory intervention in the structure of interchange fees typically ignore an analysis of the evidence in the Australian market. Since 2003 the Reserve Bank of Australia (RBA) has implemented a series of regulations on their national payment card industry. Most notable among these regulations is the reduction of interchange fees by approximately 50%. The merchants and lobbyist groups which argued for a reduction in interchange rates promised that positive benefits would be experienced by consumers, the same fundamental argument that similar groups have promoted in Canada and the United States. Official reports on the state of the industry after 5 years of regulation starkly contrasted this initial assumption. The RBA's regulations have resulted in higher cardholder fees, reduced the value of rewards programs and eliminated the incentive for card associations and issuers to invest and innovate. In fact there is no evidence that these losses have been offset by price reductions or an improvement in the quality of retailer service.

It is clear that the reduction in interchange rates that merchants seek will not come as a result of government interference in an industry that does not exhibit clear market failure, instead it will come as a result of operational changes that promote increased efficiency within that industry. For decades the card associations have footed the bill for fraudulent usage of their payment networks. With the introduction of mandatory data security standards the payment card industry is taking a long overdue step in stemming fraud due to insufficient security measures on the part of the merchant. Until standards were introduced merchants had little incentive to secure cardholder data at all and many kept payment card details in completely unencrypted files. As cybercriminals became ever more cunning the retail industry focused primarily on reducing the theft of hard goods and largely ignored the growing threat to cardholder data. While it is true that the fines levied due to non-compliance are exorbitant and are more likely to bankrupt a retailer rather than punish them, it forces retailers to individually take responsibility for their security deficiencies rather than divide the cost of compromised accounts amongst the entire industry in the form of interchange rates. In fact if PCI DSS is able to reduce payment card fraud by the amount that card associations promise, the savings realized will be far beyond those experienced as a result of mere government intervention.

The EMV standard could have a similar effect on interchange rates. While globally EMV migration is still in its infancy, its ability to reduce fraud is already apparent. Card associations have even begun to address the unequal cost/benefit distribution through a variety of intra-systems transfers that have been designed as an incentive for individual parties to take action. Chief among these incentives are interchange subsidies and liability shifts. The card associations have proved adept in utilizing these intra-system transfers in order to achieve a critical mass of support from a group of stakeholders whose business case for EMV can be significantly better than the business case for the average merchant.

If payment card fraud is analyzed on a higher level, outside of retail payments and the association-issuer-merchant dynamic, taking billions of dollars a year out of the hands of criminal organizations is a positive benefit of EMV and PCI DSS that everyone can agree upon.

How long can the U.S. hide?

The United States is the largest country yet to announce an EMV migration timeline. Despite the fact that EMV offers greatly improved security over magnetic stripe, banks and merchants have shown little interest in footing the bill to distribute the cards and install the necessary readers at the point of sale. Some analysts have warned that the financial industry's reluctance to adopt EMV in the United States will make the U.S. payment system a target for international fraud as criminals back away from markets with tighter security.

Since EMV migration in the U.K., fraud abroad has increased 11% as criminals look to markets that have not yet adopted EMV technology in order to exploit stolen magnetic stripe card data. At U.S. $380 million per year fraud abroad accounts for 38% of total card fraud losses on cards issued in the United Kingdom and fraud on U.K. issued cards in the United States has increased 181% since the U.K. adoption in 2005. By comparison, France which was the largest target for U.K. fraud abroad in 2005 adopted the EMV standard and has since seen a reduction in fraud on U.K. issued cards of U.S. $9.2 million per year, or 48%, over the same time period.

Mexico and Canada are set to complete their EMV migration projects in December 2009 and October 2010 respectively leaving the United States sandwiched between two EMV complaint nations. With EMV projects already complete in Europe, Asia, Latin American and South Africa, the United States will be the final developed market yet to implement the international standard. While losses thus far have been written off as a cost of doing business, fraud is expected to increase at an unprecedented rate once EMV adoption is complete in every other geographic region. It is therefore only a matter of time until the cost of card fraud will justify the expense of upgrading the enormous card-acceptance infrastructure and the United States will implement the EMV standard.

Chip and PIN is coming but contactless is here.

Another possible source of momentum for the U.S. migration is the growing acceptance of contactless payment cards. While it may initially appear that contactless and EMV are moving in opposite directions this is not the case. In fact EMV is a security protocol that works with contact and contactless chips. Visa is already using EMV specifications in their contactless payWave technology equipped cards that are accepted in the U.S., Canada and the United Kingdom. Merchants have been eager to adopt this technology because of the dramatic improvement in customer throughput that contactless payments provide.

U.S. market demand for EMV compliant chip cards is growing from consumers and issuers which are two segments of the industry that have not traditionally led the push for adoption. Demand for EMV chip cards is increasing from U.S. consumers as they more frequently encounter issues using their cards when traveling abroad and issuers that are keen to stay "top of the wallet" in the extremely competitive U.S. card issuing environment are looking to EMV as a new means to differentiate themselves.

Paying with the wave of a cell phone.

The ability to pay for products at the point of sale by simply waving a cell phone near a reader device represents a new payments frontier in North America even though the technology has been in use in Japan since 2004. The NFC standard employs similar technology to that of contactless cards and will enable a wide array of mobile commerce services for cell phones, such as contactless payments and ticketing. Stakeholders in North America have demonstrated a strong interest in deploying mobile payments and are now actively implementing pilots. These pilots have shown that consumers find mobile payments to be both functional and convenient. Results which were not surprising as analysts have widely speculated that NFC will be an easy sell to consumers, who have already demonstrated a fondness for contactless payments.

Mobile payments implementations will allow merchants to further capitalize on their contactless payment infrastructure and offer immediate benefits in the form of faster payment transactions and improved customer convenience. Issuers and card associations will benefit by offering a new, differentiated payment service as well as increasing transaction volumes and extending their respective brands. These benefits coupled with the fact that NFC phones will almost certainly utilize EMV standards only emphasize the case for the impending EMV adoption in the United States.

Conclusions

The problem for retailers with the adoption of so many new payments technologies in a compressed time frame is that they have chosen to view each technology as an individual challenge and the tactics that they have taken as a result have been largely reactionary. Viewed as individual projects it is difficult for retailers to imagine a return on investment sufficient enough to warrant their migration to these new technologies. The point they are missing is that PCI, EMV, contactless and even NFC are not separate projects but rather a single opportunity to re-evaluate their entire approach to retail payments. Instead of augmenting obsolete bank code, retailers should instead consider implementing a modern retail payments application that is modular and flexible enough to incorporate solutions to both today's pains and tomorrow's opportunities. This new wave of applications that is already available in the marketplace also incorporates new functionality that allows retailers to easily transfer from one acquirer to another, effectively altering the balance of power and providing the merchant with the much desired ability to negotiate their interchange rates.

The winners and losers in the constantly evolving retail payments landscape will be determined not by one's position as an association, issuer, acquirer or merchant but by the decisions and tactics taken in the face of the monumental changes already underway. While some retailers continue to debate or deny the merits of PCI DSS and EMV others have already leveraged these standards to transform their organization for the better.

Industrial Wire

You will find many different types of shelving that you can find at retail outlets and on the Internet, but if you are a business who is in the need for shelving that can take the extra load, you might just have to think about purchasing Industrial Wire Shelving. This type of shelving is built extra strong in order to withstand the heavy weight that is put on them. You can use the Internet in order to review the many types of wire shelving that is available as well as compare the prices between manufacturers to make sure you are getting a good price.

There are many suppliers of the Industrial Wire Shelving includes Grainger Industrial Supply, Safco, Omega Shelving Corp, and Housway Company. This Industrial Shelving is used in many applications, but it is popular because these shelves allow there to be free air flow below, above, and around stored items as well as these shelves will resist the build-up of mold and dust. These shelves are often found in areas where they may be a lot of particles in the air such as garages because they will not catch all that build-up.

Another popular name in supplying Industrial Wire Shelving is Safco. They are a well-known company that supplies many units of this type of shelving to many businesses as well as to homeowners. They have industrial kits that can be purchased one section at a time so that the customer only gets the amount that they need at the time that they need it. One section consists of four posts with four shelves. Each one of these shelves can withstand up to 650 pounds. As the business grows or needs for storage grows, new sections can be added to the original.

These Industrial Wire Shelving units that Safeco makes available also have adjustable feet on them so that the customer can make sure that the unit is level on whatever floor it is placed on. These feet also have plastic caps on them, so they have an extra wide foot for extra support. These shelves also have the certification of GreenGuard Certified, which means that they do not have any chemicals on them that expel dangerous emissions into the air. This danger is minimized by this certification. These units are 48"Wx18" deep with the customer deciding on the height of the shelving unit when they decide on the measurement of the shelf span between the four different shelves and the ceiling.

Tag Finishing Service

Tag Finishing Service is the process of putting an elastic string into a paper material tag allowing it to hang onto the item to be sold. Now this tag is called a hang tag. You may have seen hang tags on items in the grocery store as a coupon around the neck of the container. The coupon may offer a discount, which is intended to encouraging you to purchase the item. This type of hang tag can be used as a promotional hang tag, a coupon hang tag, a price tag, or a luggage hang tag. Now that you understand what a hang tag is, let me explain how this process is done.

For the most part this is a service that is provided to printing companies or to the printing department of a large company that has their own inside printing shop. Let us say that a customer had 500,000 pre-drilled printed tags that they need a 1½"white elastic string attached to them to hang around the neck of a wine bottle. After the printing company has printed the tag they outsource this service to a specialized company that have automatic tag finishing machines. Once we receive the tags the first thing that is done is:

  1. Unpack the tag and began to spindle them. Spindling is the process of putting the tags on a thin rod to later put them onto the machines' elevator.
  2. Load the spindled tag onto the machines elevator. The elevator will allow the tags to automatically advance until all of the hang tags have been strung with white elastic string.
  3. There is a pick up arm that will come across and pick up the tag at the top of the elevator, one tag at a time.
  4. When the arm picks up the tag it will then have the string in that single tag.
  5. Then arm will carry that tag across to a holding point that would allow the predetermined length to be made.
  6. Next a pair of "automatic fingers" will twist and tie a knot into the string. Fingers are a part of the machine that looks just like two fingers. This is a key function of the machine.
  7. The arm will hold the tag in place until the knot is tied and cut.
  8. The hang tags will collect on a holding shoot until the automatic counter has reached the set quantity that is to banded together. Normally this is 100 tags per bunch depending on the size of the hang tags.
  9. Next the machine operator will remove that bunch of tag and place them into the box to be shipped back to the printing company. This process is done until all 150,000 hang tags have been strung and tied with a 1½" white elastic string.
Tag finishing machines can allow large quantities of hang tags to be strung with elastic string at a very fast speed. Now I hope that I have provided you with a clear understanding of what tag finishing service is and how this process is done with automatic tag finishing machines. The process of tag finishing service is also sometimes called tag stringing service but they are one in the same.

Using a POS System

The right Point of Sale system will give you control over many different areas of your business operations increasing efficiency and profitability. A Point of Sale system will streamline business operations, including inventory and vendor management along with streamlining Point of Sale processes. The following overview, categorized by area of operation, highlights some of the typical benefits of using a Point of Sale system.

  • Inventory: a Point of Sale system allows you to categorize your inventory by a number of fields for easy lookup and sorting of your merchandise. A typical inventory hierarchy would include Store, Dept., Class, Subclass, Item Description, Size, and Color. Most systems also offer extended inventory descriptions to track additional information such as alternate lookup and additional product descriptions. You can quickly search and sort your inventory to track quantity on hand and restock levels for each item in your inventory. In addition you can typically track suppliers, substitutes, aliases, and parent relationships.
  • Purchasing: a Point of Sale system will help you replenish items efficiently and negotiate lower vendor costs. You can quickly generate purchase orders and add items on the fly. Purchase orders can be created for standard items as well as matrix items (size and color). Purchase orders can be tracked by order date, receive date and cancel date so you can take the appropriate action on your open orders. You will be able view what is on order and backorder at all times and print aging reports for open orders.
  • Point of Sale: allows you to reduce pricing errors and speed up checkouts. A Point of Sale system enables cashiers to process transactions and serve customers efficiently, and allows managers to maintain tight control. Some of the benefits of using a system include the ability to automatically look up and sell items based on pre-set sales, quantity discount, and preferred price levels. In addition at the Point of Sale you can check availability of items on the fly and be able to support multiple tender transactions, including cash, check and credit card.
  • Customer Relationship Management (CRM): keep a complete profile of every customer who has shopped in your store. Customer information typically includes demographics, preferences and purchase history. Using CRM features will allow you to target market and send promotions to customer based on purchasing history or other specific customer preferences.
  • Reports and Analysis: a Point of Sale system will allow you to preview, search and print daily sales reports and journals by register, batch, and receipt number.